INVESTIGATION OF FOULING EFFECT ON OVERALL PERFORMANCE OF SHELL AND TUBE HEAT EXCHANGER IN A UREA FERTILIZER PRODUCTION COMPANY IN NIGERIA
DOI:
https://doi.org/10.4314/njt.351.1074Keywords:
Fouling, Heat exchanger, heat duty, Shell and tube and PerformanceAbstract
Fouling is one of the major problems confronting heat exchangers in most industries. Shell and tube heat exchangers are perhaps the most common types of heat exchangers in industrial applications due to their flexibility and versatility. This study investigated the effect of fouling on the performance of the shell and tube heat exchanger unit of a CO2 fertilizer production company in Nigeria. Two different heat exchanger units (cold gas pre-heater and CO2 water cooler in scrubbing process) were considered for the analysis of this study. Data were obtained from operational log book, periodic maintenance data sheet and vendor’ design data sheet. The data were analyzed using various energy equations encoded in MATLAB to determine the overall heat transfer coefficients, heat duties, capacity ratios and effectiveness. The results obtained from the analysis showed that on average, the deviation of overall heat transfer coefficient, heat duty, and effectiveness from design values were 24.10%, 26.27%, and 17.17% respectively. Fouling factor was 31.58% more than the design value in a period of 47 days of operation. Fouling adversely affects the performance parameters of the heat exchangers.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.