PROPERTIES OF CHITIN REINFORCES COMPOSITES: A REVIEW
DOI:
https://doi.org/10.4314/njt.361.1214Keywords:
Chitin, mechanical, thermal, properties, biomaterialsAbstract
This paper provides a review of chitin, sources, extraction, uses, applications, chitin whiskers and it preparations and the mechanical and thermal properties of chitin reinforced composites. Also reported here is the properties of CaCO3/chitin whiskers reinforced composites. Chitin can be extracted from shrimps, crabs cell walls, yeast and green algae or from Riftia tubes with a percentage varying between 20 to 40% depending on the source. Despite the denaturing of chitin, the most widely used method of extractiong chitin from seashells is the chemical method. Chitin whiskers known by different name in literature can only be prepared by using hydrochloric acid. The rod-like particles of chitin whiskers have an average lengths and widths of 200 ± 20 nm and 8 ± 1 nm respectively or more depending on the source of chitin. Chitin whiskers reinforced composites have greatly improved the mechanical and thermal properties of the composites especially at lower filler loading. The improved properties are attributed to effective stress transfer.
http://dx.doi.org/10.4314/njt.v36i1.9
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.