FORMULATION AND IMPLEMENTATION OF MATHEMATICAL MODELS SUITABLE FOR DEFORMATION ANALYSIS OF STRUCTURES
DOI:
https://doi.org/10.4314/njt.372.1658Keywords:
Accuracy, deformation, diameter, Monitoring, Mathematical model.Abstract
Deformation monitoring is the systematic measurement and tracking of the alteration in the shape or dimensions of an object as a result of stresses induced by applied loads. Deformation monitoring is a major component of logging measured values that may be used for further computation, deformation analysis, predictive maintenance and alarming. The main purpose of structural deformation monitoring scheme and analysis is to detect any significant movements of the structure. An effective approach is to model the structure by using well-chosen discrete points located on the surface of the structure which, when situated correctly, accurately depict the characteristics of the structure. The problem of Engineering Geodesy is the formulation of the Mathematical model that will reveal the characteristic of the structure being monitored. In this paper, the mathematical model that reveals the changes in shape of a circular reservoir structure is formulated and applied numerically. A numerical solution was carried out using the Mathematical model formulated.Downloads
Published
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.