CUBIC INTERPOLATION BASED CHANNEL ESTIMATOR FOR RECTANGULAR M-QAM
DOI:
https://doi.org/10.4314/njt.372.1676Keywords:
CSI, cubic estimator, fading channel, M-QAM, PSAMAbstract
This paper propose a Pilot Symbol Assisted Modulation (PSAM) channel estimation and compensation technique for rectangular M-QAM based on Cubic interpolation in order to determine the channel state information (CSI) over flat Rayleigh fading channels. The proposed Cubic channel estimator technique is based on sliding window approach and pilot symbol estimates adjustment in order to reduce its computational time complexity. The Cubic estimator is combined with the Koetter and Vardy (KV) Reed-Solomon (RS) decoder to test its performance. The simulation results show that the Cubic interpolation gives the same performance as the Linear, and Sinc interpolators over slow flat Rayleigh fading channel; however, it achieves significant performance improvement of +1.0dB in symbol error rate (SER) over fast flat Rayleigh fading channel.
Downloads
Published
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.