REGRESSION MODELING OF THE STRENGTH PROPERTIES OF CONCRETE REINFORCED WITH POLYPROPYLENE FIBER AND ALKALI RESISTANT GLASS FIBRE
DOI:
https://doi.org/10.4314/njt.374.1887Keywords:
alkali resistant glass fibre, compressive strength, flexural strength, hybrid fibre concrete, polypropylene fibre, regression modeling. reinforced concrete, split tensile strength.Abstract
This paper presents the result of the regression modeling of the strength properties of hybrid fiber reinforced concrete made with polypropylene fiber (PPF) and alkali resistant glass fibre (ARGF). The fibres were added to grade 25 concrete at different proportion of 0.5%, 1.0%, 1.5% and 2.0% of volume of concrete. A total of sixty three cubes samples were tested for compressive strength, twenty four cylindrical samples for split tensile strength and twenty four beam samples for flexural strength. Maximum compressive strength was attained at 1.5% fibre volume with hybrid fibre ratio of 80% ARGF and 20% PPF, maximum split tensile strength was attained at 1.0% fibre volume with hybrid fibre ratio of 80% ARGF and 20% PPF. The beam samples attained its maximum flexural strength at 1.0% fibre volume with hybrid fibre ratio of 60% ARGF and 40% PPF. Empirical expressions were established by using multiple regression analysis to predict the compressive, split tensile and flexural strengths of the hybrid fibre reinforced concrete made with PPF and ARGF. The predicted values compared favourably with the experimental results from all specimens.
Downloads
Published
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.