FABRICATION AND PERFORMANCE STUDY OF UNIFORM THIN FILM INTEGRATED FILTERS
DOI:
https://doi.org/10.4314/njt.81.381Abstract
The transmission line model of a uniform rectangular thin film R-C-KR structure consisting of a dielectric layer of constant per unit shunt capacitance C sandwiched between two resistive thin films of constant per unit length resistances R and KR has been analysed using the concept of matrix parameter functions. The above filter structure has been fabricated with the help of vacuum evaporation technique and performance of the device has been studied. The effect of loading the device has also been considered. The theoretical performance of the device, evaluated with the help of a digital computer has been compared with the experimental counterpart and it has been observed that the two are in considerable agreement to each other.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.