ALLOY DESIGN AND PROPERTY EVALUATION OF TI-MO-NB-SN ALLOY FOR BIOMEDICAL APPLICATIONS
DOI:
https://doi.org/10.4314/njt.323.689Keywords:
Alloy, biomedical, biocompatibility, Young’s modulus, microstructure.Abstract
Ti-Mo alloy containing Nb and Sn were arc melted and composition analyzed by EDX. The XRD analysis indicates that the crystal structure and mechanical properties are sensitive to Sn concentration. A combination of Sn and Nb elements in synergy hindered formation athermal w phase and significantly enhanced b phase stability. The low elastic modulus and good ductility as observed implied that this alloy can be more suitable for biomedical application than the conventional metallic biomaterials from better mechanical compatibility perspective.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.