ASSESSMENT OF FIRE DAMAGE IN CONCRETE STRUCTURES: A COMPREHENSIVE STUDY USING COLORIZATION AND NON-DESTRUCTIVE TESTING

Mahendra Kumar; A. B. Gupta

doi:10.4314/njt.v43i3.2

Authors

M. Kumar Department of Structural Engineering, M. B. M. University Jodhpur, Raj, 342011, India.
A. B. Gupta Department of Structural Engineering, M. B. M. University Jodhpur, Raj, 342011, India.

DOI:

https://doi.org/10.4314/njt.v43i3.2

Keywords:

Phenolphthalein chemical, Colorimetry, NDT methods, Rebound number (RN), Temperatures, Concrete

Abstract

The research paper investigates the impact of fire on concrete structures, focusing on evaluating the temperatures reached during the fire using the colorimetry test method. It examines color changes as indicators of temperature, assesses the extent of damage to building components, and determines the depth of carbon penetration within the structure. The study employs various assessment techniques, including rebound hammer test, colorimetry test to evaluate structural integrity post-fire. Key findings include the correlation between color changes and temperature, the effectiveness of rebound hammer tests in assessing structural integrity, and the importance of considering aggregate type in color analysis. The study was conducted using prescribed non-destructive testing (NDT) techniques. For the investigation of the fire-damaged building, the Rebound number (RN) values were used to correlate the in-situ compressive strength of concrete using the standard curves developed in the laboratory for this purpose. Moreover, the approximate temperature to which any structural element had reached was determined approximately by colorimetry test. Further the residual compressive strength of concrete of these elements was also derived applying the reduction factors in Eurocode 2 for concrete exposed to varied temperatures. The maximum percentage difference between these two sets of values was 15.46% except for one case. The residual strength values of concrete of the structural elements paved a way for satisfactory evaluation of the need of retrofitting of these elements, Overall, the research offers practical insights for assessing the residual compressive strength of concrete of structural elements of fire-damaged concrete structures by two different techniques thus aiding in decision-making for rehabilitation or reconstruction efforts of such structures.

References

[1] F. Kigha, J.A. Sadeeq, and O.S. Abejide, “Effects of Temperature Levels and Concrete Cover Thickness on Residual Strength Characteristics of Fire Exposed Reinforced Concrete Beams,” Nigerian Journal of Technology, vol. 34, no. 3, pp. 429–437, 2015. https://doi.org/10.4314/njt.343.958.

[2] A.O. Oyelade, D.O. Odegbaro, and C.A. Fapohunda, “Effect on Elevated Temperature on the Compressive Strength of Concrete produced with Pulverised Steel Mill Scale,” Nigerian Journal of Technology, vol. 36, no. 4, pp. 1030–1034, 2017. https://doi.org/10.4314/n jt.364.1469.

[3] N.R. Short et al., “Assessment of Fire Damage Concrete Using Colour Image Analysis,” Construction and Building Materials, vol. 15, pp. 9–15, 2001. [Online]. Available: https://doi .org/10.1016/S0950-0618(00)00070-2.

[4] Z.P. Bazant and M.F. Kaplan, Concrete at High Temperatures- Material Properties and Mathematical Models, Longman Group Limited, 1996. https://doi.org/10.1007/978-94-015-8336-5.

[5] S. Bengtson, “Bestämning av Resthållfastheten hos Brandutsatta Betongpelare,” Thesis at KTH conducted at SP Fire Technology, 1969.

[6] G.E. Bessey, “The Visible Change in Concrete or Mortar Exposed to High Temperature,” National Building Studies, Technical Paper No. 4, London, 1950.

[7] L. Boström, “Investigation of Damage to a Bridge Caused by a Road Tanker Fire,” Brandposten, vol. 34, pp. 28–29, 2006.

[8] R.S. Boynton, Chemistry and Technology of Lime and Limestone, John Wiley & Sons, 1980. https://doi.org/10.1016/B978-0-444-59967-3.50028-1.

[9] Concrete Society, “Assessment of Fire-Damaged Concrete Structures and Repair by Gunite,” Technical Report No. 15, United Kingdom, May 1978.

[10] Concrete Society, “Assessment, Design and Repair of Fire-Damaged Concrete Structures,” Technical Report No. 68, United Kingdom, December 2008.

[11] R. Felicetti et al., “Combined While-Drilling Techniques For The Assessment Of Deteriorated Concrete Cover,” in Proc. Conference on Non-Destructive Testing in Civil Engineering, Nantes, France, 2009.

[12] I. Hager, “The Application of RGB Histogram Analysis of Colour Images as a Method of Assessing the Condition of Concrete in Structures after Fire,” in Proc. Sixth International Conference on Structures in Fire, Michigan, U.S.A., 2010.

[13] C.D. Jones, “Repair of Fire Damaged Structures,” in Proc. International Conference on Design of Structures Against Fire, Birmingham, UK, 1986.

[14] T.R. Naik et al., Handbook on Nondestructive Testing of Concrete, CRC Press, 2004. https://doi.org/10.1201/9780203491593.

[15] O. Pettersson, “Post-Behaviour of Concrete Structures Subjected to Fire,” Lund Institute of Technology, Bulletin 40, 1975.

[16] fib, “Fire Design of Concrete Structures – Structural Behaviour and Assessment,” State of the Art Report, fib Bulletin 46, 2008.

[17] Concrete Society, “Assessment, Design, and Repair of Fire-Damaged Concrete Structures,” Technical Report 68, Concrete Society, 2008.

[18] J. Albrektsson, M. Flansbjer, J.E. Lindqvist, and R. Jansson, “Assessment of Concrete Structures after Fire,” Fire Technology SP Report 2011:19, SP Technical Research Institute, Sweden, 2011, ISBN 978-91-86622-50-3, ISSN 0284-5172.

[19] N. Sundius, “Investigation of Fire Exposed Concrete by Microscopy (in Swedish),” Betong, Häfte 2, 1931.

[20] Nijland and Larbi, “Unraveling the Tempera-ture Distribution in Fire-Damaged Concrete by Means of PFM Microscopy: Outline of the Approach and Review of Potentially Useful Reactions,” Heron, vol. 46, no. 4, pp. 253–264, 2001. https://doi.org/10.5566/ias.v46.p253-264

[21] M. Faraz and M. Shaikh, “Non-Destructive Testing on RCC Structure,” International Journal of Research in Engineering and Science, vol. 9, no. 7, pp. 50–55, Jul. 2021. www.ijres.org.

[22] E.V.R. Annerel, “Assessment Techniques for the Evaluation of Concrete Structures After Fire,” Journal of Structural Fire Engineering, vol. 4, no. 2, pp. 123–130, Jun. 2013. https://doi.org/10.1260/2040-2317.4.2.123.

[23] IS: 516 (Part 5, Sec 4) – 2020, “Hardened Concrete- Methods of Test Part 5 Non Destructive Testing of Concrete, Section 4 - Rebound Hammer Test (First Revision).”

[24] S. Sosso and P. Berke, “Probabilistic Investigation of Reinforced Concrete Structures Under Fire Loading Accounting for Material and Geometric Uncertainties,” Advances in Structural Engineering, vol. 26, pp. 1307–1324, Feb. 28, 2023.

[25] BS EN 1992-1-2:2004, “Eurocode 2: Design of Concrete Structures - Part 1-2: General Rules - Structural Fire Design,” British Standards Institution (BSI), 2004.

[26] Schneider et al., “Reparability of Fire Damaged Structures,” Fire Safety Journal, vol. 16, no. 4, pp. 275–286, 1990. https://doi.org/10.1016/0 379-7112(90)90018-R.