"IMPROVED REAL-POWER LOSS MINIMISATION"
DOI:
https://doi.org/10.4314/njt.91.387Keywords:
loss minimizationAbstract
The problem of the reactive control of a power system is formulated as a static optimisation technique to ensure the minimisation of the real-power system losses by controlling the switchable reactive power sources, generator terminal voltages, transformer tap ratios and phase shiftet's. The objective function as well as the constraints are established using the linearized sensitivity relationships of power system state and control variables and standard linear programming routines are used to determine the optimum operating condition; the fast-decoupled load flow technique is employed because it is fast, simple and has less computer storage. Results of the application of this development to the IEEE 14 bus system is presented.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
How to Cite
