STABILITY ANALYSIS OF SSSS THIN RECTANGULAR PLATE USING MULTI – DEGREES OF FREEDOM TAYLOR MACLAURIN’S SERIES IN GALERKIN’S VARIATIONAL METHOD
DOI:
https://doi.org/10.4314/njt.353.1125Keywords:
MDOF Polynomial Functions, SSSS Plate Boundary Conditions, Galerkin’s Variational Method, Eigen value, Buckling CoefficientsAbstract
The stability analysis of all four edges simply supported (SSSS) thin rectangular plate using multi-degrees of freedom (MDOF) Taylor Maclaurin’s series polynomial function in Galerkin’s variational method has been investigated. This was achieved by truncating the two domain Taylor Maclaurin’s series at the seventh term to evolve the general deflection polynomial function for thin rectangular plate continuum. Consequently, the SSSS plate boundary conditions were applied, reducing the polynomial function to four degrees of freedom function. Thereafter, Galerkin’s model was applied to the classical governing differential equation of uniaxial plate buckling with the improved function to obtain the auxiliary equation, whose lowest eigenvalue corresponds to the SSSS plate buckling load coefficient, K. However, this process was facilitated using the commands in the Mathematica. The average percentage difference of K – values from two previous works and the present study when compared with the exact solution stood at 0.066%, 0.011% and 0.002%respectively.This shows that MDOF function converges better than SDOF function. Among other revelations by the study is that Galerkin’s variational methods remains a veritable tool for MDOF continuum problems.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
How to Cite
