DEVELOPMENT OF A DUAL PURPOSE REFRIGERATION SYSTEM FOR DOMESTIC USE
DOI:
https://doi.org/10.4314/njt.354.1174Keywords:
REFACON, Refrigeration System, Domestic, Coefficient of Performance, Combined Cooling Load, Energy Efficiency Ratio.Abstract
Refrigeration and air conditioning are very important in the daily activities of man, particularly in the tropical regions of the world; used in the preservation of perishable items, storage of pharmaceutical drugs, controlling of an atmospheric environment either for human/animal thermal comfort or effective performance of a scientific process. This paper is aimed at the design and construction of a dual purpose domestic refrigeration system, that can simultaneously function as a refrigerator and as well as an air conditioner henceforth known as REFACON. The refrigeration system employed was a vapour compression system. The machine was a split configuration with an Indoor and an outdoor unit (condensing unit). The machine used a singular 1,119 W single phase hermetically sealed reciprocating compressor, a fabricated condenser and split evaporator operated by temperature controlled solenoid valve. The system used 0.620 kg of R 22 refrigerant, with a discharge pressure of 1,355 kPa and suction pressure of 360 kPa. The input power was 1,350 W with an output cooling effect of 5,280 W. The combined cooling load/cooling capacity of the machine was 4,500 W. The results of tests conducted showed a total heat rejected of 6,680 W and a total evaporator heat absorption of 5,179 W. The Energy Efficiency Ratio was 3.91 while the Coefficient of Performance was 4.72. This research has shown that the design employed for the heat exchangers was appropriate and Thermal contact resistance cannot be neglected.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
How to Cite
