RESPONSE OF PACKAGED TOMATOES (Lycopersicon Esculentum Mill) TO AXIALLY AND RADIALLY COMPRESSIVE LOADING
DOI:
https://doi.org/10.4314/njt.354.1193Keywords:
axial loading, radial loading, deformation, Instron universal compression test machine and tomato.Abstract
Compression test was conducted on packaged common tomatoes in Nigeria (Roma VF) to study the effects of size and load configuration in terms of the fruits axes, deformation and stress at break and yield point of the fruits due to static loading. Different sizes of tomato were selected and ranged as big, medium sized, and small sized tomato. The bigger sizes were grouped as the A class, while the medium sizes were grouped as B class, and the smaller sized as C class. The samples were further classified as A1, A2, B1, B2, C1 and C2. While all samples having the suffix 1 were subjected to axial loading, the ones with 2 were subjected to radial loading under the Instron Universal Compression Testing Machine at the stress rate of 0.002 MPa. The study shows that majority of the samples tends to withstand higher force axially than radially for bigger and medium sized. But for the smaller tomato ranging from 35mm and below, the material was able to withstand high pressure force radially than axially before yielding.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
How to Cite
