DETERMINATION OF VERTICALITY OF RESERVOIR ENGINEERING STRUCTURE FROM LASER SCANNER DATA
DOI:
https://doi.org/10.4314/njt.362.1277Keywords:
TLS, Verticality, Reservoir, Georeferencing, Deviation. Scan station.Abstract
Terrestrial laser scanners (TLS) are used nowadays as Geomatics instruments for various applications. One of these applications is 3D survey and management of oil and gas facilities and other engineering structures. This recent attention is due to the fact that laser scanner has the ability to generate massive amounts of high resolution 3D coordinated cloud points from the surface of the structure. A structure may be scanned from several locations and when these scans are registered together, they will provide complete surface coverage. This paper outlines the use of laser scanner as applied in the determination of the verticality of Reservoir Engineering Structure. The results reveal that the Reservoir did not exceed the allowable tolerance.
Downloads
Published
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
How to Cite
