STRUCTURAL BEHAVIOR OF METAKAOLIN INFUSED CONCRETE STRUCTURE
DOI:
https://doi.org/10.4314/njt.362.1278Keywords:
Metakaolin, Calcination, Pozzolan, Chemical test, Mechanical testAbstract
This work researched into the use of metakaolin as a partial substitute for cement in concrete, metakaolin was obtained by the calcination of kaolin clay to about 700 0C Cement was replaced with the metakaolin at 0, 5, 10, 15, 20, 25, 30, and 35% at water cement ratio of 0.5. Tests such as chemical analysis, compressive strength, flexural or modulus of rupture and bond strength were carried out on the concrete samples. Chemical analysis results showed that the metakaolin is a class “N” pozzolan, while the mechanical test showed that the strength of concrete increased from 5% to 20% replacement, and the strength peaked at 20%, but decreased above this value; concrete made with metakaolin performed better than the control sample at all the percentage replacements used in this work.
Downloads
Published
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.