OPTIMISED INTAKE STROKE ANALYSIS FOR FLAT AND DOME HEAD PISTONS
DOI:
https://doi.org/10.4314/njt.362.1291Keywords:
optimized intake stroke, CFD analysis, flat and dome head pistons, internal combustion engine, CAD modellingAbstract
This research exerts are suitable for the automobile industry in understanding the performance characteristics optioned between flat head and dome head pistons in engine design. This study was carried out to analyze the optimization parameters for effective and efficient flow characteristics of air-fuel mixture at the intake port of the combustion chamber of an internal combustion engine. A unique and industrial standard CFD software, STAR-CCM V8, was used to model both geometry for flat head and dome head pistons which was developed with precise dimensions of a 1.8L gasoline engine. A planar 3-D model approach was adopted for simplified static CAD modeling and also to reduce the solver processing time. The piston models were meshed using tetrahedral mesh of base size 0.001m. The boundary and physics conditions were applied to simulate the actual intake stroke process for normal operating conditions and initial conditions. The extracted results were validate and comparisons developed to analyze the various optimization parameters for performance characteristics of the two pistons.
Downloads
Published
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.