DESIGN AND FABRICATION OF A MULTIPURPOSE RAILROAD HAND TRUCK
DOI:
https://doi.org/10.4314/njt.362.1298Keywords:
railroad, truck, paddled, swinger, multipurposeAbstract
A multipurpose railroad hand truck comprising mainly of a frame, swinger arm, connecting rod, crank shaft, gears, wheels and brake was designed and fabricated to reduce the cost of material handling in small scaled manufacturing industries. The frame and other major components of the hand truck were fabricated with mild steel bars, shafts and sheets while the guide rail was constructed using 50mm by 50mm mild steel angle bar. The hand truck is hand paddled and requires no prime mover (electric motor, IC engine, etc.), hence incurring minimal operational cost. The hand truck will be used to convey tools, materials and work pieces from one part of the workshop to another on guide rails. Results of its performance test indicated that the hand truck can carry loads up to 250kg. All materials used for the fabrication were sourced locally.
Downloads
Published
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
How to Cite
