REVIEW OF PCMs AND HEAT TRANSFER ENHANCEMENT METHODS APPLIED IN PARABOLIC TROUGH SOLAR PLANTS THERMAL STORAGE SYSTEMS
DOI:
https://doi.org/10.4314/njt.371.1582Keywords:
Latent heat, high temperature, thermal conductivity enhancementAbstract
Solar thermal power generation requires a cost effective thermal storage system. The existing two tank system is very expensive due to the storage material inventory. The use of phase change materials (PCMs) offers higher storage density. A review of potential PCMs was conducted in order to come up with commercially available ones having suitable properties. Most available PCMs have low thermal conductivity making heat transfer enhancement necessary for power applications. The various methods of heat transfer enhancement in latent heat storage systems were also reviewed systematically. The review showed that three commercially-available PCMs are suitable in the operating temperature range of parabolic trough plants. Many heat transfer enhancement methods have been investigated in the literature but the use of aluminium fins is the most promising in the temperature range of 250-330oC. Many eutectic mixtures of materials have potential for use but discrepancies exist in their reported melting temperature and latent heat of fusion.
Downloads
Published
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
How to Cite
