A MACHINE FOR PULVERIZING AND SIFTING GARI MASH
DOI:
https://doi.org/10.4314/njt.81.379Abstract
A prototype machine for pulverizing and sifting gari mash, designed as a companion to the gari frying machine developed by the authors, was built and tested. Driven by an electric motor, the prototype accepts lump3 of dewatered gari mash cuts them up into small pieces by a cake breaker and delivers the pieces by a belt conveyor on to a reciprocating sieve for sifting. The sifted gari mash and chaff exit from the machine continuously but separately. The prototype can handle 125kg of mash per hour to produce sifted gari mash which is more uniform and more wholesome than is possible manuallyDownloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
How to Cite
