USE OF X-RAY FLUORESCENCE SPECTROMETRY TO DETERMINE TRACE ELEMENTS IN GRAPHITE
DOI:
https://doi.org/10.4314/njt.141.413Abstract
This paper deals with application of X-ray fluorescence spectrometry for the detection of trace elements in graphic. An X-ray spectrometer was constructed and used to carry out measurements on graphite spheres impregnated with different chemical elements. The intensities of the lines of these trace elements, as function of concentration, were measured in order to establish the sensitivity of the spectrometer. These measurements have shown that X-ray fluorescence methods can easily be employed for detection of trace elements in graphite samples with conventional X-ray tubes, the sensitivity of the spectrometer was about 29 ppm for Zr
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
How to Cite
