SIMPLIFIED ELASTIC DESIGN OF UNCRACTED REINFORCED CONCEPT SECTION
DOI:
https://doi.org/10.4314/njt.181.435Abstract
Due to the limitations of the traditional elastic design approach of uncracked section as provided by BS 5337, an alternative design approach is proposed by which the precise depth of the neutral axis and hence the actual area of steel reinforcement are determined for any stipulated value of permissible tensile stress of concrete. The obtained result finds application in elastic flexural design of uncracked section such as required for water-retaining structures.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
How to Cite
