PERFORMANCE ANALYSIS OF AN EXPERIMENTAL CENTRIFUGAL PUMP
DOI:
https://doi.org/10.4314/njt.332.783Keywords:
centrifugal pump H47 rig, pump performance, BEP.Abstract
This paper presents results on the performance characteristics of an experimental H47–centrifugal pump. Four dimensionless numbers, namely Reynolds, flow coefficient, head coefficient and power coefficient are used. The pump was operated nominally at Reynolds number of 4x107, 3.4x107 and 2.7x107 respectively. The performance charts show that the maximum possible efficiency of the pump is less than 45% and the best efficiency point is around 42%. The maximum possible power coefficient is 2.48x10-4 at a corresponding flow coefficient of 3.2x10-3 giving a head coefficient of 0.078 at the best efficient point (BEP). Electronic sensors on the H47 rig provided measurements that ensured noticing of fluctuations across the Venturi meter caused by the onset of cavitation.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.