SINGLE-PHASE DC-AC BOOST CONVERTER
DOI:
https://doi.org/10.4314/njt.332.795Keywords:
inverter, boost converted, total harmonic distortion (THD).Abstract
This paper describes a new power conversion circuit topology for single-phase DC-AC boost converter, based on the dc-dc boost converter. It comprises an H-bridge, fed from a single input dc source through a boosting inductor. Change of load current flow is achieved with four current-steering diodes. The proposed boost inverter configuration performs single stage power conversion, which minimizes switching losses and attains higher efficiency as compared to the conventional boost inverter. The steady-state operating principle of the power circuit configuration and control strategy are described. A multi-loop structure controller is used to ensure a high dynamic performance. Computer simulations demonstrate the feasibility of the proposed boost inverter.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
How to Cite
