COMPARATIVE STUDY OF BS 8110 AND EUROCODE 2 IN STRUCTURAL DESIGN AND ANALYSIS
DOI:
https://doi.org/10.4314/njt.363.1387Keywords:
Codes, design, moments, shears, BS 8110, Eurocode.Abstract
This work was undertaken to compare the use of BS 8110 and Eurocode 2 in the design of structures and focused on outlining the relative gains and/or shortcomings of Eurocode 2 and BS 8110 under certain criteria which are loading, analysis, ease of use and technological advancement. To accomplish this, the analysis and design of the main structural elements in reinforced concrete building was undertaken using the two codes. A modest medium rise building was loaded using the two code and analyzed. Analysis was done using CSI start tedds to obtain the shear force and bending moment envelopes. For the beam, it was found that Eurocode 2 gave higher internal supports moments. For the case of maximum span moments and shear force values, the Euroode 2 values lagged behind. Column load and moments values were generally lower for Euroode 2. In summary, the comparative benefits of using Euroode 2 are that it is logical and organized, less restrictive and more extensive than the BS 8110. The new Eurocodes are claimed to be the most technically advanced code in the world and therefore should be adopted by Nigerian engineers.
Downloads
Published
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.

