A MODEL FOR THE DETERMINATION OF THE CRITICAL BUCKLING LOAD OF SELF-SUPPORTING LATTICE TOWERS
DOI:
https://doi.org/10.4314/njt.371.1577Keywords:
Lattice Tower, Beam-column, Buckling load, Truss.Abstract
Most tall columns under axial load fail by buckling. Considering the widespread use of this type of structure and the critical role it plays in service delivery, its failure will result in possible loss of lives and property and disruption of services. It is therefore necessary to evolve alternative methods of determination of the buckling load of self-supporting lattice towers. This paper therefore proposes a simple model for the determination of the critical buckling load of self- supporting lattice towers. The proposed model idealizes the lattice tower as an equivalent solid beam-column whose cross-sectional-dimensions are the unknowns to be determined. The expression is proposed by the model for the critical buckling load of self- supporting lattice tower, whose equivalent solid beam-column has a dimension b at its free end. The results obtained using the proposed model are shown to be acceptable, with a percentage difference of about0.036% when compared with results obtained using conventional methods.
Downloads
Published
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.

