A FINITE ELEMENT MODEL FOR THE ANALYSIS OF BRIDGE DECKS
DOI:
https://doi.org/10.4314/njt.271.521Abstract
The analysis of bridge decks is at present effected using mostly the method of distribution coefficients. The method involves the use of coefficients obtained from charts for the approximate determination of bending moments in simply supported right concrete bridge decks. However, the method is limited to only simply supported decks. Also, reading the charts and interpolating between curves can be very tiresome and can easily introduce errors in the analysis. This paper therefore proposes and develops a finite element model as a more versatile alternative for the analysis of bridge decks for all support conditions. The results show that the proposed model is sufficiently accurate compared to solutions obtained using the method of distribution coefficients.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
How to Cite
