OPTIMISATION OF ACETYLATION PARAMETERS FOR REDUCED MOISTURE ABSORPTION OF BAMBOO FIBRE USING TAGUCHI EXPERIMENTAL DESIGN AND GENETIC ALGORITHM OPTIMISATION TOOLS

Authors

  • OS Onyekwere FACULTY OF ENGINEERING, FEDERAL UNIVERSITY WUKARI, WUKARI, TARABA STATE, NIGERIA
  • AC Igboanugo PRODUCTION AND INDUSTRIAL ENGINEERING DEPARTMENT, UNIVERSITY OF BENIN, EDO STATE, NIGERIA
  • TB Adeleke PRODUCTION AND INDUSTRIAL ENGINEERING DEPARTMENT, UNIVERSITY OF BENIN, EDO STATE, NIGERIA

Abstract

ABSTRACT

Natural fibres have good weight-to-strength ratio which has made it a material of interest for scientists and engineers. However, the major drawback for outdoor application of natural fibres is its hydrophilic nature. In this study, attempt was made to render bamboo fibre hydrophobic through acetylation with acetic anhydride at room temperature. The functional water absorption properties were studied and the acetylation parameters, such as chemical dosage and acetylation time, were optimised. Taguchi Orthogonal Array was used for the experimental design. Based on the Taguchi design, a regression equation was generated which served as an objective function for Genetic Algorithm. Acetylation reduced the percentage water absorption of Bambusa Vulgaris fibre from 196.4% in un-acetylated fibre down to 45% in acetylated fibres within the feasible design space. The optimal parameter setting generated with genetic algorithm is 15% acetic acid concentration, 50minutes of time soaked in acetic acid, 5% acetic anhydride concentration and 30 minutes time soaked in acetic anhydride. Under the optimum condition, the percentage water absorption was 44%. A confirmation experiment validated the effectiveness of the Genetic Algorithm result.

 

Keywords: Acetylation, Bamboo Fibre, Taguchi, Optimisation, Genetic Algorithm

 

http://dx.doi.org/10.4314/njt.v38i1.14

Downloads

Published

2018-12-27

Issue

Vol. 38 No. 1 (2019)

Section

Chemical, Industrial, Materials, Mechanical, Metallurgical, Petroleum & Production Engineering

License

The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.

NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.

A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf

 

For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.

 

It is forbidden to publish the same research report in more than one journal.

How to Cite

OPTIMISATION OF ACETYLATION PARAMETERS FOR REDUCED MOISTURE ABSORPTION OF BAMBOO FIBRE USING TAGUCHI EXPERIMENTAL DESIGN AND GENETIC ALGORITHM OPTIMISATION TOOLS. (2018). Nigerian Journal of Technology, 38(1), 104-111. https://nijotech.com/index.php/nijotech/article/view/1921

Most read articles by the same author(s)

1 2 > >>