PRESSURE BEHAVIOUR OF A HORIZONTAL WELL SANDWICHED BETWEEN TWO PARALLEL SEALING FAULTS
Keywords:
Dimensionless pressure, pressure derivatives, heterogeneity, pressure performance, reservoir and wellbore characterization.Abstract
Generally, reservoir fluid flow is governed by diffusivity equation and solution to this equation helps to investigate pressure behaviour under certain reservoir and wellbore boundary conditions. In this paper however, the analytical solution method of Green and Source function is deployed to determine the performance of a horizontal well located between two parallel sealing faults, assuming simple rectangular reservoir geometry. Also, the dimensionless pressure and derivative approach is applied for all computations as it prevents the problem of unit conversions, reduces longer expressions and it helps to handle numerical values. The pressure expression derived from this work reveals that a maximum of two flow periods occur for the stated reservoir model. It was found out that an inverse relationship exists between dimensionless pressure and dimensionless length while pressure increased with thickness. Also high vertical permeability shortens the effect of the early radial flow period experienced by the horizontal well, thereby increasing productivity index. Finally, it was discovered that increased perforation length reduces the production potential of the horizontal well.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
