PROPERTIES OF CELLULOSE REINFORCED COMPOSITES: A REVIEW

Authors

  • MI Ofem DEPARTMENT OF MECHANICAL ENGINEERING, CROSS RIVER UNIVERSITY OF TECHNOLOGY, CALABAR, CROSS-RIVER STATE, NIGERIA
  • EB Ene DEPARTMENT OF MECHANICAL ENGINEERING, CROSS RIVER UNIVERSITY OF TECHNOLOGY, CALABAR, CROSS-RIVER STATE, NIGERIA
  • PA Ubi DEPARTMENT OF MECHANICAL ENGINEERING, UNIVERSITY OF CALABAR, CALABAR, CROSS-RIVER STATE, NIGERIA
  • SO Odey DEPARTMENT OF WOOD PRODUCTS ENGINEERING, CROSS RIVER UNIVERSITY OF TECHNOLOGY, CALABAR, CROSS-RIVER STATE, NIGERIA
  • DO Fakorede DEPARTMENT OF MECHANICAL ENGINEERING, CROSS RIVER UNIVERSITY OF TECHNOLOGY, CALABAR, CROSS-RIVER STATE, NIGERIA

Keywords:

Cellulose, whiskers, mechanical, thermal, properties, biomaterials.

Abstract

This paper provides a review of cellulose, sources, extraction, molecular structure, cellulose whiskers, preparations, and morphology. The mechanical and thermal properties of cellulose reinforced composites are also discussed. Detail structure of Nano whiskers is also reported. As a renewable biomaterial, the most common source of cellulose is the plant. These plants include fruit fibers (coir), seed fibers (cotton), wood, leaf fibers (sisal), bast fibers (jute, kenaf, and hemp). Other sources of cellulose are from micro-organisms such as fungi, tunicates, bacteria, and algae. Cellulose whiskers are isolated from cellulose fibers by acid hydrolysis. Cellulose micro fibril structures are made of both amorphous and crystalline regions. The amorphous regions are vulnerable to hydrolysis by acids compared to the crystalline domains.  Several techniques among which are Field Emission Scanning Electron Microscopy (FESEM), Transmission electron microscopy (TEM) and Atomic Force Microscopy (AFM) have been used to study the morphology of cellulose whiskers.  An interface between cellulose whisker and matrix is a transition zone between the matrix and the cellulose whiskers. It plays an important role in the overall mechanical properties of the composites. A soft interface domain will yield a greater resistance to fracture, while the composite will be low in stiffness and strength. On the other hand, a stiffer interface domain may cause the composite to be strong and stiff and less resistant to fracture. The addition of CW into polymers matrices has little or no effect on the glass transition temperature, (Tg) except on the modification of CW.

 

http://dx.doi.org/10.4314/njt.v39i2.9

Downloads

Published

2020-04-03

Issue

Vol. 39 No. 2 (2020): NIGERIAN JOURNAL OF TECHNOLOGY, VOL. 39, NO. 2, APRIL 2020

Section

Chemical, Industrial, Materials, Mechanical, Metallurgical, Petroleum & Production Engineering

License

The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.

NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.

A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf

 

For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.

 

It is forbidden to publish the same research report in more than one journal.

How to Cite

PROPERTIES OF CELLULOSE REINFORCED COMPOSITES: A REVIEW. (2020). Nigerian Journal of Technology, 39(2), 386-402. https://nijotech.com/index.php/nijotech/article/view/2288