ANALYSIS AND IMPLEMENTATION OF ELECTRICITY GENERATION OF 1000VA USING WIND TURBINE

Authors

  • AA Okandeji DEPT OF ELECTRICAL/ELECTRONIC ENGR’G, OLABISI ONABANJO UNIV., AGO-IWOYE, OGUN STATE, NIGERIA
  • MB Olajide DEPT OF ELECTRICAL/ELECTRONIC ENGR’G, OLABISI ONABANJO UNIV., AGO-IWOYE, OGUN STATE, NIGERIA
  • ZO Jagun DEPT. OF COMPUTER ENGINEERING, OLABISI ONABANJO UNIVERSITY, AGO-IWOYE, OGUN STATE, NIGERIA
  • DS Kuponiyi DEPT. OF ELECTRICAL/ELECTRONIC ENGR’G, GATEWAY (ICT) POLYTECHNIC, SAAPADE, OGUN STATE, NIGERIA
  • TA Aderanti DEPT. OF ELECTRICAL/ELECTRONIC ENGR’G, GATEWAY (ICT) POLYTECHNIC, SAAPADE, OGUN STATE, NIGERIA

Keywords:

wind, blade, turbine, magnetic field, battery, oscillator, inverter, controller

Abstract

The project involved the design and construction of a three-blade wind turbine, selection of generator by consideration of the available wind speed and the maximum generated voltage per revolution, and assembly of the pulse width modulated inverter with microontroller based status display and low battery shutdown system. On completion of the work, tests were conducted and the result shows that the design work was very good, the output of the generator was good enough to charge the batteries and the inverter performed an excellent task of converting the direct current (DC) voltage available in the battery to alternating current (AC) at 230V 50Hz 20”.  Furthermore, results from the discharge characteristics of the battery shows that as the battery is being used up, the output voltage remains constant.

 

http://dx.doi.org/10.4314/njt.v39i2.17

Downloads

Published

2020-04-03

Issue

Vol. 39 No. 2 (2020): NIGERIAN JOURNAL OF TECHNOLOGY, VOL. 39, NO. 2, APRIL 2020

Section

Computer, Telecommunications, Software, Electrical & Electronics Engineering

License

The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.

NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.

A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf

 

For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.

 

It is forbidden to publish the same research report in more than one journal.

How to Cite

ANALYSIS AND IMPLEMENTATION OF ELECTRICITY GENERATION OF 1000VA USING WIND TURBINE. (2020). Nigerian Journal of Technology, 39(2), 472-483. https://nijotech.com/index.php/nijotech/article/view/2296