IMPROVEMENT TO THE DESIGN OF A SOLID ABSORPTION SOLAR REFRIGERATOR
DOI:
https://doi.org/10.4314/njt.121.405Abstract
The paper presents the highlights of the design of an existing solid absorption solar refrigerator, using CaCl2 stabilised with CaSO4 as the absorbent. The performances are also discussed. The sources of poor performance were identified as high thermal and pressure inertia of the system, high heat loss coefficient, and low absorbent thermal conductivity. Based on these, measures taken in the design of a new model refrigerator, to improve the refrigerator performance are then presented.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
How to Cite
