FATIGUE STRENGTH OF REINFORCED CONCRETE FLEXURAL MEMBERS
DOI:
https://doi.org/10.4314/njt.41.349Abstract
It is well known that reinforced concrete flexural members subjected to cyclic loads behave differently compared with static bending and can collapse due to the fatigue of concrete, reinforcement or both when maximum fatigue stresses of concrete and steel are well below the corresponding static strengths. But up till now there are only very few methods of fatigue and serviceability limit calculations. Besides, even existing methods in many particular cases cannot be accepted because of poor agreements with experimental observation. Meanwhile with the rapid increasing interest in the use of reinforced concrete in various structural elements subjected to severe fatigue loadings the possibility to predict safe behaviour of these structures is becoming more and more vital.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.